LaserCutterKnowledge

1. Before using, please ajust the position of water pipes  based on the principle,that is , to inflow from water inset into laser tube and outflow from its water oulet. And keep water fully inside laser tube without bublble.Then ,turn on the power supply. Requirement: the cooling water is used soft water like distilled water or pure water.And please attention that the temperature of water used, which should be controlled between 12 degree and 30 degree.So the temperature of water is not cooler than 12 degree and not hotter than 30 degree. Specially in summer,it should change water or stop water chiller work and rest some. In cold area, Please attention that Do not let water frozen insider laser tube. Especially,when laser machine is power off, please let the water out from laser tube to avoid freeze to break laser tube.( Attentions: customers who use alternating current must let the water box grounded). 2.The supporting points of laser tube should be a quarter of whole laser tube.I

No matter what we do, safety is always the first element. For the more dangerous thing like laser, safety is more important. Let me introduce the safety precautions of laser engraving machine. when co2 laser machine is working, the operator must stay with co2 laser machine to avoid unnecessary loss. Think of the machine as a friend who is inseparable. During co2 laser machine working, the upper cover of co2 laser  machine must be put down in case of laser beam deviating to hurt people. Because inside laser machine there are laser part and  high pressure part,etc. So it is  is banned to dismantle laser machine by non-professional worker.The laser cutting machine is not a toy that can be disassembled at will. All parts of the machine must be fully reliable grounding, in case the static electricity cuts.When the insulation inside the appliance is damaged, the electricity flows from the ground to the ground, and people don't have to worry about getting an electric shock.

There are quite a few advantages to laser cutters vs other processes.(I do feasibility studies for potential clients full time for a laser cutting machine builder, so I'll try to explain without sounding biased) Typically, the alternative for a laser cutting process is a blanking press or a turret punch. A blanking press has a special cutting tool for each shape. A turret punch has a number of small tools and punches out a part by cutting a limited number of hole sizes and some line shaped blades for the outer edges.  A laser cutter traces the outline of a part with the laser melting the metal, and an assist gas blasting the molten metal out of the cut. Some advantages of a laser cutter :  Lower power consumption: a typical blanking press or turret punch consumes 50kW of power in total. A 4kW laser system uses 10kW of power total typically. Safety: A blanking press has a large blade that moves rapidly up and down, and doesn't necessarily have safet